Extend battery using the time of the conventional method

Nov 5, 2009 Author admin

Bad weather, use less as far as possible

Heavy rain and wind in the typhoon, playing with such bad weather, had better use mobile phones, so less effectively save standby time, Because the phone at work process, is through the frequency of 1,800 hz or 900 Hertz, wireless mobile communication with microwave base stations, in the above inclement weather conditions, the transport of microwave wireless communications will affect the quality, to ensure the normal signal transmission, mobile communications to increase power through the methods to protect the right signal transmission, and increase the power consumption of the direct consequence is that it will cause the mobile phone, to shorten the standby time nature. In addition, various RiLing phenomenon, also had better use less mobile phone, because these phenomena tend to wireless communication jamming in this moment, the biggest degree for mobile communication, the standby time will shorten faster.

Sealed environment, use less as far as possible

In the basement or sealing better indoor environment, use less as far as possible, so also can ensure mobile standby time not “shrink”. Because in sealed environment in mobile communication, mobile phones need more power to ensure spending some signal can penetrate ceiling, wall or other, so much the more power is spent at the expense of power.

In addition, the seal of the environment outdoor signals have good communication signals, so in sealed environment, many people using enhanced full rate coding modes, to improve the sound quality, this conversation will cost more mobile phone battery power. Therefore, the position of the weak signal, also had better answer phone call or less.

Independent function, use less as far as possible

The phone every function, all is the need of power consumption, In order to save the limited battery life, you’d better use the less important functions, such as mobile phone, game function, pictures, and Internet functions in no phone, had better not optional activation background, because the lamp light background with cell phone battery needs to power almost. Of course, if you don’t care if the length of the mobile phone standby time, might as well use them to enjoy.

Correct charging, prevent shrinkage

The biggest influence on mobile phones standby time, may be to charge the battery, If the battery is not correct, the standby time may be greatly “shrink”. For a new cell phone battery, the battery started several times, must be controlled in 14 hours, so will the lithium ion battery fully activate activity, mobile phones are the longest possible standby time. If the first few times rechargeable batteries, the time of lithium ion inert, will not be fully activate after you, no matter how charging, cannot make standby time reach maximum state.

Considering the new battery in buying back to the manufacturer in advance, for the first time, before the start charging battery, therefore you have more power to mobile phones has been open not call, then let the automatic shutdown, ensure the battery totally exhausted, then to battery charging 14 hours above.

In each of the battery, the battery must ensure that was full of, then use, but not in power has not been filled, use mobile phones, it will cause the standby time quickly shorten, And in charge, must check whether the battery, if all have more electricity, also cannot charge, so will shorten the standby time.

Reasonable storage, reduce the consumption

Don’t think in the mobile communication process, the consumption of electricity is the biggest, also don’t think save or delete the telephone number of the process, do not need too much power consumption, Actually, the preservation or delete the telephone number of the process, is the constant erase or write to flash chips process that consumes power and normal communication to power, So please don’t delete frequently, telephone number, so often can effectively save electricity. Similarly, in order to avoid mobile frequently read or find information in the SIM card, please don’t save in the SIM card, so much information can accelerate mobile reading speed, saving energy.

Regular maintenance, delaying cost

Many people think, mobile phone and maintenance, maintenance not shorten the standby time. Actually, mobile maintenance well, can ensure that the battery and mobile phone contacts between metal, can contact, If not, then maintenance metal contacts may be oxidation or by flyblown, mobile phones and batteries will appear a contact between the phenomenon, it will cause the mobile cost more power. Therefore, we should be regularly for mobile phones and battery contacts between metal cleaning, to ensure the contacts are not oxidation or not covered by dust and dirt.cell phone battery