1 how, for the new battery
In the use of lithium battery should be paid attention to in the battery is, after a period of time, while in a suspended state, use the time less than normal capacity to be shortened. But the lithium battery easily activation, long after the 3-5 times of normal
Electricity cycle can activate cells, restore normal capacity. Due to the characteristics of lithium battery itself, it almost no memory effects. So the user’s new lithium battery in the activation process, do not need special methods and equipments. Not only in theory, from my own practice, from start charging method using standard “natural” means the activation is the best.
For lithium battery “activate”, many are charging time: more than 12 hours must be repeated, three times, in order to activate cells. The “three times before the battery should fill over 12 hours,” from nickel battery (such as nickel cadmium and continued nimh). So this statement, say to misinformation. Lithium battery and cadium battery charging and discharging characteristics of very big difference, but also can be very clear tell everyone that I have had all the serious technical data are emphasized the formal overcharge and discharge of lithium battery, especially will liquid lithium ion battery caused great damage. So the best according to standard time and battery charging standard method, especially not for more than 12 hours long battery. Usually, the charging method introduced in instruction is suitable for the battery, the method of charging standards.
In addition, the lithium battery chargers in batteries will automatically stop after filling, does not exist nickel electricity charger so-called lasts 10 hours of Juan “flow” charge. That is to say, if you of lithium battery charger, put in the BaiChong also. But none of us can ensure the battery charging and discharging characteristics of protection circuit will change and the quality of your battery, so no danger in the long term. This is also our long charge against another reason.
In addition, another aspect is the lithium battery also not suited to discharge, discharge of lithium battery also very disadvantageous. This leads to the following questions.
2, the normal use should start charging
In our forum, often can see this statement, because the charge is limited, so it should be possible to batteries run for recharging. But I find a lithium-ion battery charge on the experiment, the data about the life cycle listed as follows:
Circulation service life (10) : > 1000 times DOD
Circulation service life (100% DOD) : > 200 times
DOD is one of the abbreviations depth discharge. From the table, rechargeable frequency and discharge depth, 10% of life cycle DOD than 100% DOD to many. Of course if converted into actual total capacity of charging 10% : 100,100 % * * 1000 = 200 = 200, the latter’s full charge will be better, but in front of the users to do some correction: under normal circumstances, you should have a reservation battery remaining power according to the principle of a filling, but if you charge the battery in the first 2 days you expected throughout the day may not insist, should promptly started charging, of course, if you would carry charger into office again when when.
But you need to recharge to cope with upcoming will lead to the important events of communication is busy, even though there are many more in battery power, then you just ahead, because you didn’t charge real loss “1″ time is life, charging cycles “0 x”, and often times the x will be small.
Battery remaining power after using the principle of filling and not again to you to go to extremes. And as a widespread charging, namely “as the battery power as the best use automatic shutdown. This practice is the practice of cadium battery, the aim is to avoid memory effects occur, unfortunately it in lithium batteries in the present. Once someone because like machine battery power is too low, the warning still not charging continue to use has been used in the automatic shutdown. The results of the example in the later as machine without charging and boot in response to customer maintenance, send. This is because of excessive discharge batteries due to low voltage, that do not have the normal charge and boot conditions.
